Products

  • Surface Solutions Powder
    This versatile blend of cements and aggregates is the base for Surface Solutions Trowel and Spray systems. It is supplied as neutral or bone depending on the tint strength required. When mixed with the colour sachets and selected resin type, it provides an attractive durable concrete coloured finish.

  • Colour Sachets
    24 Pre blended powdered colour sachets are available to provide the colour in Surface Solutions Trowel and Spray systems. The 10:1pbv metering ratio allows for ease of colour blending.

  • Activator Concentrate
    Supplied as a high solids acrylic emulsion. It is diluted with the water to provide both the primer and the liquid component of the Trowel and Spray Systems. It provides adhesion to existing concrete and other porous substrates. It also enhances the mechanical properties of the decorative system.

  • Finish Coat
    This pure acrylic solution is optimized to provide a non yellowing UV blocking sealing and finish coat to the Trowel and Spray Systems. Specifically used for protection of paths and driveway areas. It is resistant to black tyre staining.

  • Uraglaze
    When surfaces require chemical or scratch resistance, this two component marine grade acrylic urethane is the solution. Designed for use specifically in the epoxy based Ultakote System. It is also used to provide extra durability to Surface Solutions Trowel and Spray Systems. It contains the UB absorber which provides excellent protection to hard woods and existing epoxy coatings.

  • Levelit
    When floor contour is uneven this setting cementitious self levelling compound is the solution. Its one hour set time and ease of sand ability are essential where down time must be minimized. Used in conjunction with Activator or Epoxy Aquaseal it is suitable for exterior application.

  • Epoxy Aquaseal
    Water based two component epoxy sealer designed to withstand up to 250 psi water pressure. It is used as a stand-alone waterproofing membrane or as primer for Surface Solutions Systems where rising dampness is a problem.

  • Cat 700
    This two component water based epoxy kit provides a very tough impact resistant screed when used in conjunction with Surface Solutions powder. It can be applied in any thickness. Its self levelling properties are ideal as a durable floor topping producing excellent surface wear resistance.

  • Seal 121
    Having one-hour dry time this solvent based epoxy is used over porous substrate such as concrete and fibre cement board. This one to one ratio adds to ease of use.

  • EPL 521
    The versatile economical epoxy resin kit is used primarily for the bonding down of fine marble and quartz aggregates used in Aggraform System. A relatively long working time allows for application in chip coatings of floors, stair wells, decks, and as a complete waterproofing membrane.

  • KCP Kit
    Cracks are repaired using KCP kit, a 100% two component epoxy. In conjunction with fibreglass mesh and suitable preparation of the crack, a sound crack is obtained prior to applying other Surface Solutions screeds and coatings.

  • TUFF-LINE
    Surface Solutions Tuff-line is a premium two component epoxy - polyamide cured concrete flooring paint. Its crossed linked film provides resistance to a variety of chemicals and mineral oils